AC-DC Power Source
AC-DC Power Source
Each module is suitable as a standalone DC power source or as a dedicated battery charger. All parameters are programable via dip switches.
|Power:||1.5kW||120kW This maximum is achieved by using units in master-slave.|
|Voltage:||21 to 36VDC||190 to 300VDC|
|Current:||10A||1000A This maximum is achieved by using units in master-slave.|
|Standard Control:||HMI, RS-485|
or call +44 (0)1246 452909 to discuss this product
The REC-MT are a series of rackmounting rectifier modules. Each unit is suitable as a standalone DC power source or as a dedicated battery charger.
All parameters are programable via the dip switches on the front of the module. Alternatively they can be used with an optional control and monitoring unit, which delivers operating parameters via an internal RS-485 Bus. Modules will still operate with their default values if the monitoring unit is disconnected, therefore the continuity of all connected loads and the charging of batteries are guaranteed without any interruption.
- Hot Plug in Design with Backplane Connection
- LED Indication for Module Status Reporting
- Protection Against Under/Over Voltage
- High Efficiencies of ≥95%
- Optional DC Controller
Because the units are highly modular, it is possible to configure systems with multiple units per rack for higher power or n+1 redundant applications.
The 3-phase models of the REC-MT series operate from a 3-wire, 3-Phase mains input connection without neutral. The mating connector for input and output is supplied separately so the units can be used with or without a 19” subrack as long as correct airflow is allowed for.
Interfaces and Control
Standard DIP Switches
The unit is very configurable, as settings can be configured by using the DIP Switches and the up/down buttons. To begin, the first DIP switch must be placed in position 1, and the required function entered on the remaining DIP switches. By pressing the V/A button once the display will flash. The value can now be adjusted using the up/down buttons. By pressing the V/A button once more, the values are stored.
DC Controller (Option /USV6 )
The USV6 DC Controller can be used to control and monitor REC-MT units via the CAN communication bus. The USV6 can be used with a wide variety of power supplies, DC-DC converters, inverter modules and batteries as a universal programmable monitoring device with multiple thresholds.
The unit can measure up to 3 different V & I values, and these can be shown on the display. The 9 digital inputs are individually programmable, as are the 4 relay outputs available for remote signaling of thresholds or alarms.
Form Factor and Enclosures
19" Rackmounting Case (Option /RC )
A 19" rackmounting case can be provided to mount the REC-MT into a cabinet. Either two or three modules can be fitted per rack, depending on the chosen model.
Wallmounting Bracket (Option /W )
A 5mm plated steel bracket allows the REC-MT to be wallmounted, with either its side or rear face on the wall, so that users still have access to the module without taking the bracket off the wall. Brackets are only available for models with outputs of 110VDC/20A or 220VDC/10A.
If your test requirement is short term, we have a wide range of DC sources in our rental range.
The robust construction with rugged metal handles make them ideal for industrial hot swap applications. These rectifiers are also ideal for high voltage power plants, substations, oil & gas installations and many other applications.
|Max Power||VAC Input||Output Voltage||Vout Range||Nominal Current|
|REC-MT 24-50A-ANS||1500W||230VAC||24VDC||21 - 36VDC||50A at 24V||Add|
|REC-MT 24-50A-AN3||1500W||350 - 460VAC||24VDC||21 - 37VDC||50A at 24V||Add|
|REC-MT 48-30A-ANS||1800W||230VAC||48VDC||41 - 60VDC||30A at 48V||Add|
|REC-MT 110-20A-ANS||3kW||230VAC||110VDC||95 - 150VDC||20A at 132V||Add|
|REC-MT 110-20A-AN3||3kW||350 - 460VAC||110VDC||95 - 150VDC||20A at 143V||Add|
|REC-MT 220-10A-ANS||3kW||230VAC||220VDC||190 - 300VDC||10A at 285V||Add|
|REC-MT 220-10A-AN3||3kW||350 - 460VAC||220VDC||190 - 300VDC||10A at 285V||Add|
|REC-MT 110-40A-AN3||6kW||350 - 460VAC||110VDC||95 - 150VDC||40A at 143V||Add|
|REC-MT 220-20A-AN3||6kW||350 - 460VAC||220VDC||190 - 300VDC||20A at 285V||Add|
Frequently asked questions
Can't find what you're looking for? Ask us a question
Please fill out the form below and we will get back to you as soon as possible with an answer to your question.