This flexible rectifier system is aimed at the telecoms and rail industry. The subrack can be populated with up to four 600W modules.
|Voltage:||100 to 130VDC||100 to 130VDC|
or call +44 (0)1246 452909 to discuss this product
The flexible REC-2400-230-110-K10 system is aimed at the telecoms and rail industry. The subrack can be populated with up to four 600W modules.
Power outputs of up to 2400W can be achieved, with full load efficiencies of >92%. Modules are hot swappable and can be configured to provide a redundant DC output. An optional battery module allows users to connect the system to batteries and carry out automatic tests at regular intervals to check the battery status and capacity.
- All PCBs Protected Against Humidity
- Efficiency >92% at Nominal Load
- Output Ripple <100mVpp
- Redundant DC Output
- Redundant AC Input
- Hot Swap Modules
The individual MREC600 modules for installation in the REC-2400 sub rack are hot pluggable, i.e. they can be mounted in the sub rack or extracted during operation. The modules can be retrospectively fitted to meet growing user power requirements. The decoupling of the DC bus system and active load sharing of individual modules with the resulting module redundancy provides a system with a very high availability. The internal PCB is protected against damage by humidity.
Interfaces and Control
Controller Module (Option /MCON)
The controller module is used for controlling and monitoring the REC-2400-230-110-K10 system via the internal CAN bus. The Local Craft Terminal (LCT) LAN interface permits the connection of a local PC or network. A clear and easy-to-operate user interface facilities control, programming and linkage of all controller parameters depending on user requirement. Output voltage is controlled via the temperature dependent charging characteristic.
Battery Connection Module (Option /MBATT)
The battery connection module is required for connecting a battery to the REC-2400-230-110-K10 system. It includes the battery connector, battery fuse and LVD as well as the control logic for the battery management. Functions such as symmetry monitoring, current measurement and temperature characteristic are integrated. Signal alarms can be adjusted and analysed by the controller operating software.
The full system weighs less than 18kgs. Operating temperatures range from -25°C to +60°C without derating.
If your test requirement is short term, we have a wide range of DC sources in our rental range.
|Max Power||Output Voltage||Vout Range||Number of Modules||Nominal Current|
|REC-2400-600-230-110-1||600W||110VDC||100 - 130VDC (per module)||1||6A||Add|
|REC-2400-600-230-110-2||1200W||110VDC||100 - 130VDC (per module)||2||12A||Add|
|REC-2400-600-230-110-3||1800W||110VDC||100 - 130VDC (per module)||3||18A||Add|
|REC-2400-600-230-110-4||2400W||110VDC||100 - 130VDC (per module)||4||24A||Add|
Frequently asked questions
Can't find what you're looking for? Ask us a question
Please fill out the form below and we will get back to you as soon as possible with an answer to your question.