To set them poles apart from the competition, Durham University needed the best test equipment available when characterising magnets.
By using AC and DC power supplies from ETPS, the institute are able to gather accurate experimental data. This allows them to validate and understand the limitations of their numerical models, while ensuring confidence in a specific device design.
To read more about the project, click here.
27th January 2020
Related Products, Industries & Case Studies
Power Electronics, Machines & Drives
Characterising Magnets
To set them poles apart from the competition, Durham University wanted the best test equipment available when refurbishing their lab. Read more
Tried and Tested
Power Electronics, Machines & Drives
In order to boost the performance of your technologies and applications, precise testing environments must be configured to continually achieve reliable results. Read more
Quick View
LAB-TC
Advanced High Power DC Sources
| Min | Max | |
|---|---|---|
| Power: | 0 to 10kW | 0 to 2MW This maximum is achieved by using units in master-slave. |
| Voltage: | 0 to 52V | 0 to 2000V Configurations >1500V are possible with a centre tapped earth. |
| Current: | 0 to 13A | 0 to 44800A This maximum is achieved by using units in master-slave. |
| Standard Control: | Analogue, RS-232 |
|---|---|
| Optional Control: | HMI, CAN, Ethernet, IEEE 488.2, Optolink, RS-422, USB |
The LAB-TC range is a highly advanced series of modular DC sources. The internal resistance can be adjusted making the units ideal for battery simulation. An optional function generator allows virtually any conceivable DC waveform to be created.
Quick View
LAB-DSP
High Density DC Power Source
| Min | Max | |
|---|---|---|
| Power: | 0 to 750W | 0 to 3kW |
| Voltage: | 0 to 6V | 0 to 600V |
| Current: | 0 to 1.25A | 0 to 400A |
| Standard Control: | HMI, Analogue, IEEE 488.2, RS-485 |
|---|---|
| Optional Control: | Ethernet, Isolated Analogue |
The rackmounting LAB-DSP product family has 45 models covering a range of voltages and current. Outputs are available at 750W, 1500W and 3000W. Constant voltage and constant current mode are provided. OVP and OCP levels are adjustable.
Quick View
EAC-S
Advanced Programmable AC Sources
| Min | Max | |
|---|---|---|
| Power: | 0 to 250VA | 0 to 10kVA |
| Voltage: | 0 to 300VRMS | 0 to 700VRMS Different nominals can be selected via the options table. |
| Current: | 0 to 3A | 0 to 80A |
| Standard Control: | HMI |
|---|---|
| Optional Control: | Ethernet, IEEE 488.2, Isolated Analogue, RS-232, RS-485, SD Card, USB |
The EAC-S is designed for exacting users who demand a high quality adjustable waveform. The distortion level at full power is a mere 0.1%. Sine, triangular and square waves at up to 500Hz (2kHz option) can be selected.
