HTP-CPS
HV Modules with Highly Stable Outputs
HTP-CPS
HV Modules with Highly Stable Outputs
HTP-CPS modules feature a maximum output of either +5kV to -20kV. Rated at 10W, these units provide a very stable output with low ripple and noise.
| Min | Max | |
|---|---|---|
| Power: | 0 to 10W | 0 to 10W |
| Voltage: | 0 to +5kV | 0 to -20kV |
| Current: | 0 to 500μA | 0 to 2mA |
| Standard Control: | Analogue |
|---|---|
| Form Factor: | Module |
or call +44 (0)1246 452909 to discuss this product
Product Information
The 10W HTP-CPS modules provide an incredibly stable high voltage output with low ripple and noise. Models are available with an adjustable output of up to either -20kVDC or +5kVDC from a 24VDC input. Each unit is built into a compact metal case.
Output limits are set and enabled over analogue interface via a D-Sub connector, with the ability to monitor V & I values. The units also feature very low electromagnetic interference.
- High Voltages up to -20kVDC
- Stable Output Voltage
- Very Low EMI
Technical Specifications
Form Factor and Enclosures
New Systems
Selection Table
| Part Number |
Max Power | Voltage Range | Current Range | |
|---|---|---|---|---|
| HTP-CPp 50-205-r | 10W | 0 to +5kV | 0 to 2mA | Add |
| HTP-CPn 200-504-r | 10W | 0 to -20kV | 0 to 0.5mA | Add |
Frequently asked questions
Can't find what you're looking for? Ask us a question
Please fill out the form below and we will get back to you as soon as possible with an answer to your question.
