Motor Driven AC Source
Motor Driven AC Source
The EAC-MT-SL is a series of desktop AC power sources. The high visibility LEDs clearly show the voltage and current being taken from the source.
|Power:||0 to 500VA||0 to 1kVA|
|Voltage:||0 to 270VRMS||0 to 1000VRMS Non-standard builds are possible, contact us for information.|
|Optional Control:||Analogue, Ethernet, IEEE 488.2, Isolated Analogue, RS-232, RS-485, USB|
or call +44 (0)1246 452909 to discuss this product
The EAC-MT-SL is a series of AC Power Sources conveniently packaged in a desktop case. The high visibility LEDs clearly show the voltage and current being taken from the source.
These units are a cost effective method of providing an adjustable AC output in applications where the frequency does not need to be varied.
- Isolated or Standard Analogue Interfaces
- Leakage Current Measurement
- Computer Interface Options
- Setting Time of 100V/Sec
- Galvanic Isolation
Operating Ranges and Features
The output voltage is set quickly and accurately via a motor regulated transformer. The output is galvanically isolated from the input. If the standard output range is not wide enough please contact ETPS for high voltage versions.
The power supply can also be provided with a leakage current measurement function. This gives the user the ability to check the leakage current up to 20mA between the output of the AC Source and the case or line earth of the unit under test.
Interfaces and Control
A variety of analogue and computer interfaces are available should remote control be required. These include IEEE488.2, RS-232, RS-485, ethernet & USB. For users looking for analogue control a choice of either standard or isolated versions are available at 0-5VDC or 0-10VDC.
Form Factor and Enclosures
If the unit is required to be integrated into a cabinet then it can be optionally built as a 6U cassette.
If your test requirement is short term, we have a variety of single phase units in our rental AC source range.
Frequently asked questions
What is the maximum over current protection provided for the EAC-MT-SL?
The maximum over current is twice the rated output current for 500milliseconds before the protection circuit shuts down the unit.
Can't find what you're looking for? Ask us a question
Please fill out the form below and we will get back to you as soon as possible with an answer to your question.