High Voltage PCB Modules
High Voltage PCB Modules
These modules provide outputs between 200V and 1000V and can be soldered and mounted on PCBs. A proportional analogue signal is used to set voltage.
|Voltage:||0 to 200V||0 to 1kV|
|Form Factor:||PCB Module|
or call +44 (0)1246 452909 to discuss this product
The HTP-APS are a series of modules providing outputs between 200VDC and 1000VDC at 2 different power levels. At 500mW the modules operate from an input of 5VDC.
The 1W versions are supplied from 11½ to 15½VDC. Depending on the model chosen the maximum output current is between 500µA to 5mA. The HTP-APS modules also offer a highly stable output while exhibiting a relatively low ripple and noise level.
- Ripple & Noise <30mVP-P (Typ. <10mVP-P)
- Set & Monitor Output Voltage with Inhibit
- Positive or Negative Output Polarity
- Stable Output Voltage
- Up to 1000VDC at 1W
- Very Low EMI
Operating Ranges and Features
The output polarity of the HTP-APS is factory set to either positive (option /P) or negative (option /N) on order.
Interfaces and Control
As standard a proportional analogue signal is used to set the output voltage. If preferred, the modules can be optionally built with a fixed output voltage. A monitor pin is also provided allowing the voltage to be proportionally measured.
Safety and Protection
The inhibit pin enables the output to be switched ON/OFF via high or low signal.
Form Factor and Enclosures
These DC/DC converters are built into potted steel cases. This construction together with a patented resonance mode principle helps to ensure low electro-magnetic interference.
|Max Power||Input Voltage||Output Voltage||Output Current|
|HTP-APx 02 255 5||0.5W||4.5 - 5.5VDC||0 - 200V||2.5mA||Add|
|HTP-APx 04 125 5||0.5W||4.5 - 5.5VDC||0 - 400V||1.2mA||Add|
|HTP-APx 06 804 5||0.5W||4.5 - 5.5VDC||0 - 600V||0.8mA||Add|
|HTP-APx 08 604 5||0.5W||4.5 - 5.5VDC||0 - 800V||0.6mA||Add|
|HTP-APx 10 504 5||0.5W||4.5 - 5.5VDC||0 - 1000V||0.5mA||Add|
|HTP-APx 02 505 12||1W||11.5 - 15.5VDC||0 - 200V||5mA||Add|
|HTP-APx 04 255 12||1W||11.5 - 15.5VDC||0 - 400V||2.5mA||Add|
|HTP-APx 06 165 12||1W||11.5 - 15.5VDC||0 - 600V||1.6mA||Add|
|HTP-APx 08 125 12||1W||11.5 - 15.5VDC||0 - 800V||1.2mA||Add|
|HTP-APx 10 105 12||1W||11.5 - 15.5VDC||0 - 1000V||1mA||Add|
Frequently asked questions
Can't find what you're looking for? Ask us a question
Please fill out the form below and we will get back to you as soon as possible with an answer to your question.