High Voltage PCB Modules


High Voltage PCB Modules

These modules provide outputs between 200V and 1000V and can be soldered and mounted on PCBs. A proportional analogue signal is used to set voltage.

Read more

Min Max
Power: 0.5W 1W
Voltage: 0 to 200V 0 to 1kV
Current: 500μA 5mA
Standard Control:Analogue
Form Factor:PCB Module

View more technical data

or call +44 (0)1246 452909 to discuss this product

Product Information

The APS are a series of modules providing outputs between 200VDC and 1000VDC at 2 different power levels. At 500mW the modules operate from an input of 5VDC.

The 1W versions are supplied from 11½ to 15½VDC. Depending on the model chosen the maximum output current is between 500µA to 5mA. The APS modules also offer a highly stable output while exhibiting a relatively low ripple and noise level.

  • Ripple & Noise <30mVP-P (Typ. <10mVP-P)
  • Set & Monitor Output Voltage with Inhibit
  • Positive or Negative Output Polarity
  • Stable Output Voltage
  • Up to 1000VDC at 1W
  • Very Low EMI

Technical Specifications

Operating Ranges and Features

Interfaces and Control

Safety and Protection

Form Factor and Enclosures


Selection Table

0.5W Models

Max PowerInput VoltageOutput VoltageOutput Current
APx 02 255 50.5W4.5 - 5.5VDC0 - 200V2.5mA Add
APx 04 125 50.5W4.5 - 5.5VDC0 - 400V1.2mA Add
APx 06 804 50.5W4.5 - 5.5VDC0 - 600V0.8mA Add
APx 08 604 50.5W4.5 - 5.5VDC0 - 800V0.6mA Add
APx 10 504 50.5W4.5 - 5.5VDC0 - 1000V0.5mA Add

1W Models

Max PowerInput VoltageOutput VoltageOutput Current
APx 02 505 121W11.5 - 15.5VDC0 - 200V5mA Add
APx 04 255 121W11.5 - 15.5VDC0 - 400V2.5mA Add
APx 06 165 121W11.5 - 15.5VDC0 - 600V1.6mA Add
APx 08 125 121W11.5 - 15.5VDC0 - 800V1.2mA Add
APx 10 105 121W11.5 - 15.5VDC0 - 1000V1mA Add

Frequently asked questions

Can't find what you're looking for? Ask us a question

Please fill out the form below and we will get back to you as soon as possible with an answer to your question.


Added to Quote Cart

Your quote cart is currently empty.