High Voltage DC Loads
High Voltage DC Loads
This series of 500V loads provides a wide range of current and power ranges. A selection of computer interfaces are available.
|Power:||0 to 600W||0 to 5.4kW|
|Voltage:||4 to 500VDC||4 to 500VDC|
|Current:||0 to 12A||0 to 180A|
|Optional Control:||Ethernet, IEEE 488.2, RS-232, USB|
or call +44 (0)1246 452909 to discuss this product
This series of 500VDC electronic loads provides a wide range of current and power ranges. A wide range of computer interfaces are available upon request.
The front panel has an isolated BNC output so that the load current can be monitored on an external scope. The high accuracy 5 digit displays features 16 bit resolution. Dual setting ranges provide excellent measurement accuracy at low current.
- CC, CR, CV, CP, Dynamic and Short Mode
- Full Selection of Computer Interfaces
- 150 Sets Store/Recall Memory
- LabVIEW Drivers
For production testing GO/NG limits can be set. When used in constant current or constant power mode the load can be set to operate dynamically. This enables the load current to be switched between two levels and the current rise and fall times adjusted. The time that the load is at the higher sink level and the time it is at the lower setting can also be adjusted.
A short circuit test function is provided as standard. The short voltage and current can be read via the front panel or interface. If short circuit functions are not desired then the unit can be built without this feature.
The load can be set to turn on or off when a preset voltage is present at the load's terminals.
APPLICATION SPECIFIC GUIs
The ELP-3360F is available with a current waveform generator (option /9923). This allows the electronic load to sink different levels of energy over time. These load profiles can either be created on a PC using the waveform generator software, or imported from oscilloscope data.
If your test requirement is short term, we have a wide range of DC electronic loads in our rental range.
The high voltage makes these electronic loads ideal for Power Factor Correction testing along with a host of other production and laboratory applications.
|Max Power||Voltage Range||Current Range|
|ELP-3360F||600W||4 - 500VDC||0 - 20A||Add|
|ELP-3361F||1.2kW||4 - 500VDC||0 - 40A||Add|
|ELP-3362F||1.8kW||4 - 500VDC||0 - 60A||Add|
|ELP-3367F||1.8kW||6 - 500VDC||0 - 12A||Add|
|ELP-33611F||2.4kW||4 - 500VDC||0 - 80A||Add|
|ELP-33621F||3.6kW||4 - 500VDC||0 - 120A||Add|
|ELP-33671F||3.6kW||6 - 500VDC||0 - 24A||Add|
|ELP-33622F||5.4kW||4 - 500VDC||0 - 180A||Add|
|ELP-33672F||5.4kW||6 - 500VDC||0 - 36A||Add|
Frequently asked questions
Can't find what you're looking for? Ask us a question
Please fill out the form below and we will get back to you as soon as possible with an answer to your question.