High Current DC Loads
High Current DC Loads
These high current DC loads offer an incredible amount of functionality for the cost. A large front panel display shows voltage, current and power.
|Power:||0 to 600W||0 to 1.8kW|
|Voltage:||0.6 to 60VDC||0.6 to 60VDC|
|Current:||0 to 120A||0 to 360A|
|Optional Control:||Ethernet, IEEE 488.2, RS-232, USB|
or call +44 (0)1246 452909 to discuss this product
These high current DC Sources offer an incredible amount of functionality for the cost. The large front panel display shows voltage, current and power simultaneously.
A full range of computer interfaces are available upon request. LabVIEW drivers can also be provided, making the ELP-3350F series ideal for larger system integration.
- CC, CR, CV, CP, Dynamic and Short Mode
- Full Range of Computer Interfaces
- OCP, OPP and Short Test Functions
- Automatic Sense Adjustment
- Scope Output
Operating Ranges and Features
To alter the frequency and duty cycle the total time that the waveform is high and low can also be adjusted remotely or locally.
An external input is provided so that the load can follow a signal from an arbitrary waveform generator. A BNC output is also available to monitor the current waveform on an external oscilloscope.
The easy to use front panel memory function is ideal for quickly implementing common test procedures when the unit is in use.
A GO/NG meter check along with a programmable load on and load off voltage ensures this unit is suitable for a wide range of applications.
The unit can be set to operate in constant current, resistance, voltage and power operating modes. True dynamic operation is available in CC & CP modes. This enables the user to simulate real world load conditions by switching between current levels and adjusting the rise and fall times.
The ELP-3350F series is also built with an OCP, OPP and short test function. The time that the load simulates a short circuit can be set along with the short voltage high and low levels. The actual short circuit voltage and current can be measured.
APPLICATION SPECIFIC GUIs
The ELP-3350F is available with a current waveform generator (option /9923). This allows the electronic load to sink different levels of energy over time. These load profiles can either be created on a PC using the waveform generator software, or imported from oscilloscope data.
If your test requirement is short term, we have a wide range of DC electronic loads in our rental range.
Frequently asked questions
Can't find what you're looking for? Ask us a question
Please fill out the form below and we will get back to you as soon as possible with an answer to your question.