High Current High Power DC Load
High Current High Power DC Load
This 60V series features constant current, resistance, voltage and power modes. Dual ranges are provided for current rise and fall times.
|Power:||0 to 2.4kW||0 to 14.4kW|
|Voltage:||0.7 to 60VDC||0.7 to 60VDC|
|Current:||0 to 240A||0 to 1000A|
|Optional Control:||Ethernet, IEEE 488.2, RS-232, USB|
or call +44 (0)1246 452909 to discuss this product
With a high power capability and wide current range this feature laden series of electronic loads are suitable for many applications.
When working with a DC source that requires low currents to be sunk the load’s dual ranges allow for high degree of resolution and accuracy.
- CC, CR, CV, CP, Dynamic and Short Mode
- OCP, OPP and Short Test Functions
- IEEE488.2 and RS-232 Interfaces
- Scope Output for Load Current
Operating Ranges and Features
Slew rates as slow as 16mA per microsecond can be set on some models while others allow fast changes of up to 30A per microsecond to be programmed.
A BNC connector is provided on the rear panel to allow the load to follow an external signal such as that created by a waveform generator. An isolated BNC connector is also provided on the front panel to monitor the actual load current.
To simplify test procedures all units have 150 sets store/ recall memory. The simultaneous display of V, I and W values provides real time monitoring of UUT.
Constant current, resistance, voltage and power modes are all provided as standard. When operated in CC or CP modes the loads provide true dynamic functionality. This enables real world pulsing loads to be accurately simulated. Dual ranges are provided for the current rise and fall times.
Interfaces and Control
Front panel control and display along with RS-232C and GPIB interfaces are provided for remote control and measurement.
APPLICATION SPECIFIC GUIs
The ELP-33500F is available with a current waveform generator (option /9923). This allows the electronic load to sink different levels of energy over time. These load profiles can either be created on a PC using the waveform generator software, or imported from oscilloscope data.
Form Factor and Enclosures
All units are shipped in a wheeled cabinet. Dimensions of each cabinet are listed in the selection table of the datasheet.
If your test requirement is short term, we have a wide range of DC electronic loads in our rental range.
|Max Power||Voltage Range||Current Range|
|ELP-33521F||2.4kW||0.7 - 60VDC||0 - 480A||Add|
|ELP-33511F||3.6kW||0.7 - 60VDC||0 - 240A||Add|
|ELP-33531F||3.6kW||0.7 - 60VDC||0 - 480A||Add|
|ELP-33541F||3.6kW||0.7 - 60VDC||0 - 720A||Add|
|ELP-33512F||5.4kW||0.6 - 60VDC||0 - 360A||Add|
|ELP-33532F||5.4kW||0.7 - 60VDC||0 - 720A||Add|
|ELP-33542F||5.4kW||0.7 - 60VDC||0 - 1000A||Add|
|ELP-33513F||7.2kW||0.6 - 60VDC||0 - 480A||Add|
|ELP-33514F||9kW||0.6 - 60VDC||0 - 600A||Add|
|ELP-33515F||10.8kW||0.6 - 60VDC||0 - 720A||Add|
|ELP-33516F||12.6kW||0.6 - 60VDC||0 - 840A||Add|
|ELP-33517F||14.4kW||0.6 - 60VDC||0 - 960A||Add|
Frequently asked questions
Can't find what you're looking for? Ask us a question
Please fill out the form below and we will get back to you as soon as possible with an answer to your question.