The system can be retrospectively expanded with additional modules to achieve a higher performance or even provide a redundant system to grow with the requirements of your application.

Inverter Module (Option /MINV500)

The inverter module for the REC-E-3200 system offers a secure and uninterrupted supply of AC for critical loads. The MINV500 plug-in module provides a 230VAC, 50Hz sine-wave output signal supplied by the DC bus system. The connection to the power supply is set up via the front of the module. The MINV500 module for REC-E-3200 subracks is hot pluggable. PCBs are protected against humidity and short-circuit protection is provided as standard.

Controller Module (Option /MCON)

The Controller Module is used for controlling and monitoring the REC-E-3200 system via the internal CAN bus. The Local Craft Terminal (LCT) LAN interface permits the connection of a local PC or network. A clear and easy-to-operate user interface facilities control, programming and linkage of all controller parameters depending on user requirement. Output voltage is controlled via the temperature dependent charging characteristic.

Battery Connection Module (Option /MBATT)

The battery connection module is required for connecting a battery to the REC-E-3200 system. It includes the battery connector, battery fuse and LVD as well as the control logic for the battery management. Functions such as symmetry monitoring, current measurement and temperature characteristic are integrated.

The full system weighs less than 18kg. Operating temperatures range from -25°C to +60°C without derating.

If your test requirement is short term, we have a wide range of DC sources in our rental range.